Download for Deco X3600 V1.60

Please choose hardware version:


>How to find the hardware version on a TP-Link device

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Product Overview

Setup Video

  • How to Configure a Deco System with Starlink

  • How to Resolve Double NAT using Starlink



A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8);   Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)
    How to find the hardware version on a TP-Link device
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

Deco X3600(US)_V1.6_1.2.4 Build 20231226

Published Date: 2024-01-19 Language: Multi-language File Size: 23.47 MB

New Features/Enhancements:
1. Added SafeSearch and YouTube Restricted function in Homeshield.
2. Added OFDMA and MU-MIMO toggle.
3. Improved speed of onboarding process.
4. Supported 32 bit mask for DHCP and static IP dialing.
5. Enhanced the security of device.

Bug fixes:
1. Fixed the bug of misdetection of port scanning for IoT devices.
2. Fixed the bug related to guest network isolation in AP mode.

Please update your Deco APP to the latest version for the new features.

Deco X3600(US)_V1.6_1.2.2 Build 20230726

Published Date: 2023-08-07 Language: Multi-language File Size: 23.23 MB

Fixed the issue of abnormal link on the Ethernet port in some cases.

Deco X3600(US)_V1.6_1.2.1 Build 20230611

Published Date: 2023-06-26 Language: Multi-language File Size: 23.26 MB

New Features/Enhancements:
1. Support for customizing Satellite Deco signal source.
2. Support for customizing Clients connection preference.
3. Support for Reboot Schedule.
4. Support for NO-IP and DynDNS.
5. Support for setting Effective Time and Bandwidth Limit for guest network.
6. Added Smart DHCP switch under Access Point mode.
7. Added an alert in the App when the main Deco and modem negotiation speed is only 10/100Mbps.
8. Added the static route function.
9. Added the ability to customize the MTU.
10. Added IOT network function.
11. Added configuration via DS-Lite.
12. Optimized the Homeshield function.
13. Improved system stability.

1. Please update your Deco APP to the latest version for the new features.
2. If there are other Deco models in your Deco network, you may miss some new features till other models release updates in the near future.

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.


TP-Link Deco

The Deco app allows you to quickly and easily install and manage your Deco Whole-Home Wi-Fi System.