Download for TL-SG2210P
Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8)
Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)
Vx.30=Vx.32 (eg:V3.30=V3.32)
- Product Overview
Controller Software
Omada_SDN_Controller_v5.14.32.3_Windows |
Download | |
---|---|---|
Published Date: 2024-11-01 | Language: Multi-language | File Size: 318.62 MB |
Operating System: Windows 7/8/10/11/Server |
||
Omada_SDN_Controller_v5.14.32.3_linux_x64.deb |
Download | |
---|---|---|
Published Date: 2024-11-01 | Language: Multi-language | File Size: 228.80 MB |
Operating System: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
Omada_SDN_Controller_v5.14.32.3_linux_x64.tar.gz |
Download | |
---|---|---|
Published Date: 2024-11-01 | Language: Multi-language | File Size: 241.05 MB |
Operating System: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
Omada_SDN_Controller_v5.14.26.1_linux_x64.deb |
Download | |
---|---|---|
Published Date: 2024-07-10 | Language: Multi-language | File Size: 217.79 MB |
Operating System: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
Omada_SDN_Controller_v5.14.26.1_linux_x64.tar.gz |
Download | |
---|---|---|
Published Date: 2024-07-10 | Language: Multi-language | File Size: 230.75 MB |
Operating System: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
Omada_SDN_Controller_v5.14.26.1_Windows |
Download | |
---|---|---|
Published Date: 2024-07-10 | Language: Multi-language | File Size: 317.68 MB |
Operating System: Windows 7/8/10/11/Server |
||
Omada_SDN_Controller_v5.14.20.9_Windows |
Download | |
---|---|---|
Published Date: 2024-05-27 | Language: Multi-language | File Size: 317.48 MB |
Operating System: Windows 7/8/10/11/Server |
||
Omada_SDN_Controller_v5.13.30.8_linux_x64.deb |
Download | |
---|---|---|
Published Date: 2024-02-27 | Language: Multi-language | File Size: 189.79 MB |
Operating System: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
As this version optimizes the WAN/LAN port configuration of Omada Gateway, it will cause some WAN ports to be enabled by default and cannot be disabled. This may result in changes to the load balance configuration, you can make the changes manually. |
Omada_SDN_Controller_v5.13.30.8_linux_x64.tar.gz |
Download | |
---|---|---|
Published Date: 2024-02-27 | Language: Multi-language | File Size: 202.04 MB |
Operating System: Ubuntu 16.04/18.04/20.04/22.04, Debian 8/9/10 |
||
As this version optimizes the WAN/LAN port configuration of Omada Gateway, it will cause some WAN ports to be enabled by default and cannot be disabled. This may result in changes to the load balance configuration, you can make the changes manually. |
Omada_SDN_Controller_v5.13.30.8_Windows |
Download | |
---|---|---|
Published Date: 2024-02-05 | Language: Multi-language | File Size: 283.05 MB |
Operating System: Windows 7/8/10/11/Server |
||
As this version optimizes the WAN/LAN port configuration of Omada Gateway, it will cause some WAN ports to be enabled by default and cannot be disabled. This may result in changes to the load balance configuration, you can make the changes manually. |
Omada_SDN_Controller_v5.8.4_Windows |
Download | |
---|---|---|
Published Date: 2023-01-06 | Language: Multi-language | File Size: 236.31 MB |
Operating System: Windows 7/8/10/11/Server |
||
Omada Discovery Utility
Omada Discovery Utility 5.2.1 |
Download | |
---|---|---|
Published Date: 2024-08-05 | Language: English | File Size: 40.51 MB |
Operating System: Windows/Mac OS/Linux |
||
Enhancements & Fixed Bugs: Optimized some functions and fixed bugs.
Note: 1. To run this software, you need to install JRE 8.0 on your PC first. 2. Double-click the software or run the command "java -jar **.jar" to run the software on MacOS (**.jar is the name of this software). 3. Omada Controller and Discover Utility cannot run on the same computer at the same time. |
Omada Discovery Utility 5.2.0 |
Download | |
---|---|---|
Published Date: 2024-05-06 | Language: English | File Size: 40.04 MB |
Operating System: Windows/Mac OS/Linux |
||
New Feature/Enhancement: 1. Adapt to Omada SDN Controller v5.14.20. 2. Added support for Easy Managed Switch and OLT device identification and inform url. |
MIBs Files
TP-Link_L2 Switch_MIB |
Download | |
---|---|---|
Published Date: 2024-02-29 | Language: English | File Size: 199.18 KB |
Operating System: Windows/Mac OS/Linux |
||
|
Setup Video
-
How to Monitor and Manage Devices via Omada SDN Controller
This video will show you how to monitor and manage devices via Omada SDN Controller.
More -
How to Configure Schedules to Automate Network Control via Omada SDN Controller
This video shows how to configure WLAN Schedule, Port Schedule (PoE Schedule, Port Schedule), Upgrade Schedule, and Reboot Schedule to help you easily manage your network using the Omada Software Controller for demonstration.
More -
How to Monitor and Manage Clients via Omada SDN Controller
This video will show you how to monitor and manage clients via Omada SDN Controller.
More -
How to Check the Clients Signal Strength and Estimate the Actual Speed
This video will show you how to check the client signal strength and estimate actual network speeds.
More -
How to Create User Accounts on Omada SDN Controller
This video shows how to create custom roles, local user accounts and cloud user accounts of different levels on the Omada SDN Controller.
More -
How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller
This video will show you How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller.
More -
How to Adopt Omada Devices via Omada Controller
This video will show you how to adopt Omada devices and configure a gateway network via the Omada SDN Controller (Omada Software Controller is used as an example).
More
FAQs
- How to Configure Management VLAN on TP-Link Smart and Managed Switches Using the New GUI
- Troubleshooting multicast video issues on Omada switches
- How to configure Switch Port Mirroring on Omada Controller
- How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI
- How to configure LACP on our Smart/ Managed Switch
- How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI
- Troubleshooting guide for TACACS+ Authentication Fails on Omada Switch
- Omada Switch DHCP Relay Configuration Guide
- Suggested Configurations for AVoIP protocols on Omada Switches
- How to configure Auto-VoIP on Omada Switches via Omada Controller
- How to Configure IGMP Snooping on Omada Switches for Hotel IPTV Scenarios
- Commonly Recommended ACL Configurations on Omada Switches
- How to Configure Management VLANs for Omada Switches and APs (for SOHO / Home Networking Scenario)
- How to configure Management VLANs for Omada Switches and APs (for Business scenario)
- How to configure 802.1X VLAN Assignment on Omada Controller
- What should I do if I cannot access the web management page of my TP-Link switch?
- Do you still have any doubt about the effect of QoS on the Switch of TP-Link?
- Getting started without an Omada Controller
- How to configure 802.1Q VLAN on Omada Switches when used with a third-party router
- What should I do if my switch has no Internet access?
- How to setup Switch as DHCP server on Omada Controller
- How to configure DHCP Auto Install to let switch get configuration file and image from TFTP server
- How to build an 802.1X access authentication system using Switches on Omada Controller
- How to configure Optical Line Terminal (OLT) and Omada Switch with XM60A
- Why my PoE powered device cannot work properly when connected to the PoE Switch?
- How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches
- What are the differences in features and application scenarios among various serial switches?
- How to configure LAG (LACP) on Omada Switches via Omada Controller
- Troubleshooting 802.1X (Dot1X) Authentication Issues on TP-Link Omada Switches
- RADIUS Authentication Troubleshooting
- How To Fix VLAN Communication Issues Within Same VLAN on TP-Link Omada Switches
- Best Practices for Preventing Network Loops with Omada SDN Solutions
- How to configure a TP-Link Switch as DHCP Server in Standalone mode
- Typical CLI Configuration Examples for TP-Link JetStream Switch
- How to test the Jumbo Frame pass-through feature on TP-Link switches
- How to configure RSTP on TP-Link switches using the old GUI
- How to change the IP address of the smart and managed switches using the old GUI and CLI
- How to configure MAC ACL on Smart/Managed switch
- How to choose PoE switch
- How to check and modify VLANs on a TP-Link JetStream switch via SNMP
- How to achieve AAA Authentication through TACACS + server on the switch
- How to configure OpenSSH 7.0(and above) to login smart and managed switches?
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
How to find the hardware version on a TP-Link device - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
TL-SG2210P(UN)_V5.6_5.20.2 Build 20240807 |
Download | |
---|---|---|
Published Date: 2024-09-11 | Language: English | File Size: 10.91 MB |
TL-SG2210P(UN)_V5.6_5.20.0 Build 20230818 |
Download | |
---|---|---|
Published Date: 2024-01-08 | Language: English | File Size: 11.17 MB |
This firmware is fully adapted to Omada SDN Controller v5.9 and above. The TL-SG2210P(UN)5.0/5.6 can be upgraded using this firmware, and the upgrade will result in the following changes: |
TL-SG2210P(UN)_V5.6_5.0.6 Build 20230602 |
Download | |
---|---|---|
Published Date: 2023-07-05 | Language: English | File Size: 10.04 MB |
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Apps
- Omada APP
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.