SG3428XPP-M2
Omada 24-Port 2.5GBASE-T and 4-Port 10GE SFP+ L2+ Managed Switch with 16-Port PoE+ & 8-Port PoE++
- 8× 2.5G PoE++ ports (up to 60 W PoE out per port)**
- 16× 2.5G PoE+ ports (up to 30 W PoE out per port)
- 4× 10G SFP+ slots
- 500 W total PoE budget*
- Centralized cloud management via the web or the Omada app†
- Standalone management via web, CLI, SNMP, and RMON
- Static Routing helps route internal traffic for higher efficiency
- VLAN, ACL, QoS, IGMP Snooping, OAM, and DDM
- ERPS supports rapid protection and recovery in a ring topology
Learn more about Omada PoE technology >
Learn more about Omada Cloud SDN>
Learn more about Omada Multi-Gig technology >
-
24× 2.5 Gbps RJ45 Ports
(8× PoE++, 16× PoE+) -
4× 10 Gbps
SFP+ Slots -
Centralized
Management† -
Omada
App† -
500 W Total PoE Budget (Max
60 W for Each PoE++ Port)* -
Zero-Touch
Provisioning† -
Ethernet Ring
Protection Switching -
Static
Routing
Empowering the Real WiFi 6 and WiFi 7 with 2.5G PoE++ / PoE+ Ports
-
8× 2.5 Gbps
PoE++
RJ45 Ports
-
Up to
60W
PoE per PoE++ Port
-
16× 2.5 Gbps
PoE+
RJ45 Ports
-
Total
500W
PoE Power Budget*
-
Access
Points -
PTZ HD IP Cameras
with Heaters -
Smart Building
Lighting -
Audio
System -
2.5G
NAS/Server -
Workstation
Easily Build a Whole 10G Multi-gigabit Network
-
Switch with
10G Uplink -
PoE Switch
with 10G Uplink -
Wi-Fi 7/6 APs
with 10G/2.5G Ports
Software Defined Networking (SDN) with Cloud Access
Remotely manage your access points, switches, and gateways across multiple sites all from a single interface.
Controller
Controller
Controller
(Subscription Required)
†These functions require the use of the Omada SDN Controller. Zero-Touch Provisioning requires the use of the Omada Cloud-Based Controller. Go to the Omada Cloud-Based Controller Product List to find all the models supported by the Omada Cloud-Based Controller.
*PoE budget calculations are based on laboratory testing. The actual PoE power budget is not guaranteed and will vary due to client limitations and environmental factors. The maximum power output of every single PoE++ port is 60 W.
**SG3428XPP-M2 is incompatible with Passive PoE and other non-standard PoE devices. The standards refer to IEEE 802.3af/at/bt.
***ISP features can only be configured in standalone mode.
Attention: It is recommended to use only one SM5310-T (TL-SM5310-T) module for the SG3428XPP-M2.