Scarica per TL-SG3428MP V6

New Feature/Enhancement:

1. Added support for TL-SG3428(UN) V2.20 and V2.26, TL-SG3428X(UN) V1.20 and V1.26, TL-SG3428XMP(UN) V3.0 and V3.6, TL-SG3428MP(UN) V6.0 and V6.6.

Notes:

1. This driver is also compatible with other TP-Link Omada switches with USB console ports.

2. If you are using Windows 7 and are experiencing problems with error code 52, please install the security update KB3033929 for Windows 7.

Notes:

For TP-LINK switches with USB Console port

New Features & Enhancements:

1. Fully adapted to Omada Controller v5.9, with the following features supported:

1) CLI Configuration;

2) IPv6 features, including MLD Snooping, Legal DHCPv6 Server, ACL, Static Route, etc.;

3) IP-Port Mask type for Group profiles;

4) Network topology optimization by reporting LLDP information to the Omada Controller;

5) Device Info;

6) Tools, including Network Check, and Terminal.

2. Modified the working mechanism of DHCP Snooping. After the upgrade, when the Port Trust mode is disabled, the switch records the IP address, MAC address, VLAN ID, and Port number of the DHCP client for automatic binding; when this mode is enabled, the switch doesn't record the above information of the DHCP client connected to the port, and doesn't generate IMPB binding entries. By default, this mode is enabled, and should be changed to Disabled for access ports if necessary.

3. Modified the working mechanism of MVR. You will be able to add 4000 MVR groups, but the number of Maximum MVR groups in effect at the same time remains the same, varying from model to model. Note that after the upgrade, unknown multicast groups may be flooded, and it is recommended to set Unknown Multicast Groups of IGMP Snooping and MLD Snooping to "Discard".

4. Increased the Circuit ID of DHCP Option 82 from 64 to 128 symbols.

5. Expanded the ERPS Ring ID from 1-8 to 1-255 available.

6. Added support for the CLI to display the DHCP lease times for IMPB binding entries learned by DHCP Snooping.

7. Expanded the description of hostname, port, and interface to 128 symbols.

8. Upgraded SSH algorithms.

Notes:

1. This firmware is fully adapted to Omada SDN Controller v5.9 and above.

New Features & Enhancements:
1. Increased the number of VLAN Interfaces to 128.
2. Fully adapted to Omada Controller v5.6, with the following features supported:
1) Jumbo Frame;
2) EEE;
3) Flow Control (802.3x);
4) Loopback Detection VLAN-Based;
5) LACP (802.3ad);
6) DHCP L2 Relay;
7) Time-Based ACL;
8) MAC address format customization for 802.1X.
The following new features are available in Standalone mode:
3. Added support for DHCPv6 Relay, DHCPv6 L2 Relay, and RA Guard feature.
4. Added Log and SNMP Trap for IPv6 DHCP Filter.
5. Added support for DHCP Auto Install.
6. Added support for customizing DHCP Options.
7. Added the new SDM template "IPv6 combined ACL", "packet content ACL" and "enterpriseMix".
8. Increased the max MVR group to 4k.
9. Added support for Ethernet Ring Protection Switching (ERPS), which can be configured via CLI.

Bug fixed:
1. Fixed the bug of incorrect traffic statistics in Omada Controller mode.
2. Fixed the bug that the RADIUS packets with specific fields caused the switch to crash.
3. Fixed the bug that Combined ACL failed to block traffic between Layer 3 networks.
4. Fixed the bug that frequent topology changes of MSTP may cause the switch to crash.
5. Improved the performance of Ingress Bandwidth Control.

Notes:
1. For TL-SG3428MP(UN) V6 and V6.6
2. This firmware is fully adapted to Omada SDN Controller v5.6 and above.