AX1500 Wi-Fi Range Extender
- RE500X comes equipped with the latest wireless technology, Wi-Fi 6, for faster speeds, greater capacity, and reduced network congestion.
- Creates a Mesh network by connecting to a TP-Link OneMesh™ router for seamless whole-home coverage.
- Gigabit Ethernet Port – Provides faster-wired connections to smart TVs, computers and gaming consoles
- Intelligent Signal Light – Helps to determine the best location for optimal Wi-Fi coverage by indicating the signal strength in the current placement
- AP Mode – Creates a new Wi-Fi access point to enhance your wired network with Wi-Fi capability
- TP-LINK Tether App – Easily access and manage your network using any iOS or Android mobile device
- Ultimate Compatibility – Extends the range of any Wi-Fi router or wireless access point
Eliminate Dead Zones with Powerful WiFi
AX1500 WiFi 6 Range Extender
RE500X
high-performance amplifiers
Tri-Core
1.5 GHz CPU
Works with any WiFi router*
1000 M
Ethernet Port
Dual Band
MU-MIMO
OneMesh™
Life in the fast lane with advanced WiFi6
WiFi 6 comes with it all: faster speeds, lower latency, and more connections. It also features 25% faster data throughput compared with last-gen WiFi thanks to 1024-QAM.‡ With this speed boost, experience high-speed and stable WiFi throughout your rooms.
4 high-performance amplifiers, we got you covered
Enjoy 4K streaming and gaming in whatever room you’re in thanks to RE500X’s 4 high-performance amplifiers. Whether you’re sharing a pad with friends or living in your forever home, RE500X sends out strong signals to those hard-to-cover areas.
Tri-Core 1.5 GHz CPU
Many full-blown routers only have dual-core and below
OneMesh™
Roaming Redefined
Stop searching around for full bars. OneMesh™ is a simple way to form a Mesh network with a single WiFi name for seamless whole home coverage. Just connect RE500X to a OneMesh™ router.
-
Smart Roaming
Uninterrupted streaming when moving around your home
-
One Wi-Fi Name
No more switching Wi-Fi network names
-
Easy Creation
OneMesh™ Router and OneMesh™ Range Extenders pair instantly
-
Unified Management
Manage the entire network all from the TP-Link Tether app
-
Traditional Router with Extender
-
OneMesh™ Router + Range Extender
Wide.
Wider.
Widest.
Keep your internet focused on a single room or blanket an entire floor with WiFi by picking between 3 strength levels on the Tether app.
OFDMA
More efficient data.
Orthogonal Frequency Division Multiple Access helps integrate the data of different end devices for higher efficiency.‡
WiFi 6
OFDMA
Data Transmitted
WiFi 5
OFDM
Data Transmitted
Beamforming
Strong, targeted WiFi.
Find the direction of your phone or laptop, and accelerate your signal strength.
Beamforming
None
DIY WiFi
Every home is different. That’s why our AX range extender provides you with a flexible array of options to custom create your own high-speed WiFi.
- 2.4 GHz
- 5 GHz
- APS
Built-In
Access Point Mode
RE500X is more than a wireless range extender. Simply plug an Ethernet cable into its Ethernet port, and easily turn your wired internet connection into a 2×2 MU-MIMO dual band wireless access point.‡
- 1Power Indicator
- 2Smart Indicator
- 32.4 GHz Indicator
- 45 GHz Indicator
- 5Reset
- 6WPS Button
- 7Gigabit Port
HARDWARE FEATURES | |
---|---|
Ports | 1 Gigabit Ethernet Port |
Button | WPS Button, Reset Button |
Input Power | 100-240V~50/60Hz |
Power Consumption | 10W |
Dimensions ( W x D x H ) | 3.1×1.4×5.9 in. (78×36×149 mm) |
Antenna | 2 Internal Antennas |
WIRELESS FEATURES | |
---|---|
Wireless Standards | IEEE 802.11a/n/ac/ax 5GHz, IEEE 802.11b/g/n 2.4GHz |
Frequency | 2.4GHz and 5GHz |
Signal Rate | 300 Mbps at 2.4GHz, 1200 Mbps at 5GHz |
Working Modes | Range Extender/Access Point |
Reception Sensitivity | 5GHz: 11a 6Mbps:-95dBm 11ax HE20 MCS11:-65dBm 11ax HE40 MCS11:-62dBm 11ax HE80 MCS11:-60dBm 11ax HE20 MCS0:-94dBm 11ax HE40 MCS0:-92dBm 11ax HE80 MCS0:-89dBm 2.4GHz: 11b 1Mbps:-99dBm 11n HT20 MCS0:-95dBm 11n HT20 MCS7:-77dBm 11n HT40 MCS0:-92dBm 11n HT40 MCS7:-73dBm |
Wireless Functions | Enable/Disable Wireless Radio DFS (the latest firmware and hardware version is required) Access Control LED Control Power Schedule Wi-Fi Coverage |
Wireless Security | 64/128-bit WEP, WPA/WPA2-PSK encryptions |
Transmission Power | CE (EU): 2.4 GHz ≤15dBm, 5 GHz ≤23dBm |
OTHERS | |
---|---|
Certification | FCC, RoHS |
Package Contents | Wi-Fi Range Extender RE500X Quick Installation Guide |
System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, 8, 8.1, 10, MAC OS, NetWare, UNIX or Linux Internet Explorer 11, Firefox 12.0, Chrome 20.0, Safari 4.0, or other Java-enabled browser |
Environment | Operating Temperature: 0℃~40℃ (32℉ ~104℉) Storage Temperature: -40℃~70℃ (-40℉ ~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
†Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.
‡Use of Wi-Fi 6 (802.11ax), and features including OFDMA, 1024-QAM, MU-MIMO and HE160 requires clients to also support the corresponding features.
§Smart Roaming is designed for devices that support the 802.11k/v standard.
*The product may not be compatible with routers or gateways with firmware that has been altered, based on open source programs, or is non-standard or outdated.
Actual network speed may be limited by the rate of the product's Ethernet WAN or LAN port, the rate supported by the network cable, Internet service provider factors and other environmental conditions.