TL-SG105PP-M2
5-Port 2.5G Desktop Switch with 4-Port PoE++
- 5× 100 Mbps/1 Gbps/2.5 Gbps RJ45 ports
- With four PoE++ ports, transfers data and power on one single cable
- Works with IEEE 802.3af/at/bt type3 compliant PDs
- 802.1p/DSCP QoS enable smooth latency-sensitive traffic
- Supports PoE Power up to 60 W for each PoE++ port
- Supports PoE Power up to 123 W for all PoE ports*
- PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices
- Plug and Play, no configuration and installation required
Five
2.5G Ports
123W PoE
Budget*
PoE Auto Recovery
Hassle-Free
Cabling
Optimized Multicast,
Prioritized Traffic
Fanless Design for
Silent Operation
Plug and Play
Desktop/
Wall-
Mounting
2.5G Super-Fast Speeds
without Changing Cables
This switch delivers 2.5 times faster network
performance than traditional Gigabit switches.
It works with CAT5e, CAT6, CAT6a and above
cables without upgrading your cabling.
- CAT5e Cable
- CAT6 Cable
- CAT6a Cable
-
2.5 Gbps 2.5× Faster
-
1 Gbps
Empowering the Real Wi‑Fi 6
and Wi‑Fi 7 with 2.5G PoE++
Ports
4× 2.5 Gbps
PoE++
RJ45 Ports
Up to
60W
per PoE++ Port
Total
123W
PoE Power Budget
Compatible with
802.3bt/at/af
PoE and non-PoE
devices
2.5G
Wi-Fi 7/6 AP
2.5G Gaming
Computer
2.5G
NAS/Server
4K
Video
Network Video
Recorder
Printer
System Self-Healing with PoE Auto Recovery
With PoE Auto Recovery button on, the switch automatically
detects and reboots the PD devices, such as cameras and APs,
when they fall offline or go unresponsive, guaranteeing the
stable operation of PoE-connected devices, without need for
manual monitoring and restart.
Access
Point
PoE Auto
Recovery
Durable Metal Casing
TL-SG105PP-M2's durable metal case allows for
efficient heat dissipation, excellent signal interference
prevention, and a long service life.
Silent Operation
Its fanless design reduces power consumption and noise generated, making it ideal for noise-sensitive environments.
Desktop /
Wall-Mounting
You can put the switch on desk or mount it to the wall according to your demand.
Multiple Application Scenarios
Surveillance
Works with IP Cameras
Wi-Fi Coverage
Works with Access Points
Wired Connections
Works with Non-PoE Devices such as PCs and Printers
Plug and Play
| Standards and Protocols | IEEE 802.3u, 802.3ab, 802.3x, 802.1p, 802.3bz |
|---|---|
| Interface | 5× 100Mbps/1Gbps/2.5Gbps RJ45 Ports, AUTO Negotiation, AUTO MDI/MDIX |
| Fan Quantity | Fanless |
| External Power Supply | External Power Adapter (Output: 53.5 VDC / 2.43 A) |
| LED | • Power• Link/Act Indicators |
| PoE Ports (RJ45) | • Standard: 802.3 af/at/bt type3 compliant• PoE++ Ports: Ports 1–4• Power Supply: 123 W |
| Dimensions ( W x D x H ) | 6.2 × 4.0 ×1.0 in (158 × 101 × 26 mm) |
| Max. Power Consumption | • 7.41 W (220/50 Hz. no PD connected)• 142.86 W (220/50 Hz. with 123 W PD connected) |
| Max Heat Dissipation | • 25.19 BTU/h (220 V/50 Hz with no PD connected• 485.72 BTU/h (220 V/50 Hz with 123W PD connected) |
| Jumbo Frame | 12 KB |
|---|---|
| Switching Capacity | 25 Gbps |
| Packet Forwarding Rate | 18.6 Mpps |
| MAC Address Table | 4K |
| Advanced Features | • Compatible With IEEE 802.3af/at/bt type3 Compliant PDs• Mac Address Auto-Learning And Auto-Aging• IEEE 802.3x Flow Control• 802.1p/DSCP QoS• IGMP Snooping• PoE Auto Recovery (Ports 1-4) |
|---|---|
| Transmission Method | Store-And-Forward |
| Certification | FCC, CE |
|---|---|
| Package Content | • TL-SG105PP-M2• Power Adapter• Installation Guide• Rubber Feet |
| Environment | • Operating Temperature: -5–40 ℃ (23–104 ℉);• Storage Temperature: -40–70 ℃ (-40–158 ℉)• Operating Humidity: 10–90% RH non-condensing• Storage Humidity: 5–90% RH non-condensing |
*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
△Numbers after different modes represent the effective ports for that mode.