Recent updates may have expanded access to feature(s) discussed in this FAQ. Visit your product's support page, select the correct hardware version for your device and check either the Datasheet or the firmware section for the latest improvements added to your product.
Building a robust and efficient EasyMesh network with Ethernet Backhaul is a great way to enhance your home Wi-Fi experience. In this article, we will guide you through the process of setting up an Ethernet Backhaul using two EasyMesh routers.
Please note that the Ethernet Backhaul only works when both your main router and satellite router support EasyMesh Ethernet backhaul.
There are two scenarios:
Scenario 1: Change wireless backhaul to Ethernet backhaul
If both the main router and satellite router are already in an EasyMesh network, and the firmware that supports Ethernet backhaul has been installed, you could directly connect the main router’s LAN port to any Ethernet port of the satellite via an Ethernet cable to use Ethernet backhaul.
Scenario 2: Add a new satellite router to EasyMesh
At this point, please don’t configure the satellite and make sure it is under factory mode at first, if it was configured before, reset the satellite router to factory defaults.
Then connect your main router’s LAN port to the satellite’s LAN port via an Ethernet cable.
Notes:
1. When adding a new router to EasyMesh, please use the satellite router’s LAN port as the backhaul port. After EasyMesh is built, all the ports on the satellite router (WAN, LAN, WAN/LAN) are available for Ethernet backhaul.
2. As long as the Ethernet backhaul is built successfully, the wireless backhaul will disconnect automatically. Similarly, if the Ethernet backhaul is disconnected for some reasons, devices will rebuild the mesh network via the wireless backhaul.
How to confirm whether Ethernet Backhaul is working or not?
Please login the web interface of the main router and go to EasyMesh page, you will be able to see the Connection of each satellite device, and Ethernet icon means it is connected via Ethernet Backhaul.
If it still shows wireless icon, please check if the Ethernet cable is functioning and connected correctly or not.
Is this faq useful?
Your feedback helps improve this site.
What’s your concern with this article?
Dissatisfied with product
Too Complicated
Confusing Title
Does not apply to me
Too Vague
Other
We'd love to get your feedback, please let us know how we can improve this content.
Thank you
We appreciate your feedback. Click here to contact TP-Link technical support.
This website uses cookies to improve website navigation, analyze online activities and have the best possible user experience on our website. You can object to the use of cookies at any time. You can find more information in our privacy policy . Don’t show again
This website uses cookies to improve website navigation, analyze online activities and have the best possible user experience on our website. You can object to the use of cookies at any time. You can find more information in our privacy policy . Don’t show again
Basic Cookies
These cookies are necessary for the website to function and cannot be deactivated in your systems.
Analysis cookies enable us to analyze your activities on our website in order to improve and adapt the functionality of our website.
The marketing cookies can be set through our website by our advertising partners in order to create a profile of your interests and to show you relevant advertisements on other websites.