10-Port Gigabit Desktop Switch with 6-Port PoE+ and 2-Port PoE++ 1

10-Port Gigabit Desktop Switch with 6-Port PoE+ and 2-Port PoE++ 2

10-Port Gigabit Desktop Switch with 6-Port PoE+ and 2-Port PoE++ 3

10-Port Gigabit Desktop Switch with 6-Port PoE+ and 2-Port PoE++ 4

10-Port Gigabit Desktop Switch with 6-Port PoE+ and 2-Port PoE++ 5

10-Port Gigabit Desktop Switch with 6-Port PoE+ and 2-Port PoE++ 6

TL-SG1210PP

10-Port Gigabit Desktop Switch with 6-Port PoE+ and 2-Port PoE++

9× 10/100/1000Mbps RJ45 Ports, 1× 1000Mbps Combo SFP/RJ45 Port
With 2× PoE++ ports and 6× PoE+ ports, transfers data and power on one single cable
Works with IEEE 802.3af/at/bt compliant PDs
802.1p/DSCP QoS enable smooth latency-sensitive traffic
Supports PoE Power up to 30 W for each PoE+ port and 60 W for PoE++ port
Supports PoE Power up to 123 W for all PoE ports^*
Plug and Play, no configuration and installation required
Up to 250m data and power transmitting range under Extend Mode^**
PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices
Isolation Mode allows one-click client traffic separation for higher security and performance
Priority Mode guarantees the quality of sensitive applications like video monitoring in critical business areas by prioritizing the data of ports 1-2

Learn more about TP-Link PoE technology >

123 W PoE
Budget*
Long-Range PoE+
(250m**)
One-Click
Priority Mode
Isolation Mode for
Security

PoE Auto
Recovery
Plug
and Play
Silent
Operation
Durable Metal
Casing

Power over Ethernet, Flexible Network Deployment

Compliant with the IEEE 802.3af/at/bt PoE standards, the switch supports a total PoE power budget of 123 W with 30 W max per PoE+ port and 60 W max per Poe++ port. When total power consumption exceeds 123 W, the intelligent power managerment will cut the lower priority ports power to protect devices from damage.

PoE++
PoE+

Access
Point
IP
Phone
IP
Camera
4K
Video
Network Video
Recorder
Computer

Instantaneous Multi-mode Toggles^△

Extend Mode

Up to 250m Transmissions

With extend mode, the PoE transmission distance reaches up to 250m** —perfect for IP Camera deployment in large areas.
Priority Mode

One-click Port Priority

Priority mode guarantees the quality of sensitive applications like video and voice in critical business areas by prioritizing the data of ports.
Isolation Mode

Traffic Separation for Security

Isolation Mode easily divides traffic for ports to avoid snooping/tampering and isolates broadcast storm for higher security.
Recovery Mode

PoE Auto Recovery

Recovery mode helps automatically detect and reboot PD devices, such as cameras and APs, when they fall offline or go unresponsive—all without needing manual monitoring and restarts.

Plug and Play

1. Connect to Power
2. Connect the Devices

IP Phone

IP Camera

Access Point

Internet

Router
3. Enjoy

HARDWARE FEATURES
Interface	• 9× 10/100/1000Mbps RJ45 Ports, 1× 1000Mbps Combo SFP/RJ45 Port • AUTO Negotiation • AUTO MDI/MDIX
Network Media	• 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) • EIA/TIA-568 100Ω STP (maximum 100m) • 100BASE-TX: UTP category 5, 5e cable (maximum 100m) • EIA/TIA-568 100Ω STP (maximum 100m) • 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) • EIA/TIA-568 100Ω STP (maximum 100m)
Fan Quantity	Fanless
External Power Supply	External Power Adapter (Output: 53.5 VDC / 2.43 A)
Packet Forwarding Rate	14.88 Mpps
PoE Ports (RJ45)	• Port 1-2 compliance with 802.3af/at/bt; Ports 3-8 compliance with 802.3af/at • Power Supply: 123 W
Mac Address Table	4K
Switching Capacity	20 Gbps
Dimensions ( W x D x H )	8.2 x 5.0 x 1.0 in (209 x 126 x 26 mm)
Max Power Consumption	• 8.7 W (220/50 Hz. no PD connected) • 144.1 W (220/50 Hz. with 123 W PD connected)
Max Heat Dissipation	• 29.67 BTU/h (220/50 Hz. no PD connected) • 491.38 BTU/h (220/50 Hz. with 123 W PD connected)

SOFTWARE FEATURES
Advanced Features	• Compatible With IEEE 802.3af/at/bt Compliant PDs • Mac Address Auto-Learning And Auto-Aging • IEEE 802.3x Flow Control • 802.1p/DSCP QoS • IGMP Snooping • Extend Mode Button (Ports 1–4, Up to 250 m PoE power supply and data transmission) • PoE Auto Recovery (Ports 1-8) • Isolation Mode (Ports 1-4/5-8) • Priority Mode (Ports 1-2)
Transfer Method	Store-And-Forward

OTHERS
Certification	FCC, CE, RoHS
Package Contents	• TL-SG1210PP • Power Adapter • Installation Guide
Environment	• Operating Temperature: 0–40 ℃ (32–104 ℉); • Storage Temperature: -40–70 ℃ (-40–158 ℉) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing

For additional version information, please go to the support page.

^*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.

**The speed of the ports in extend mode will downgrade to 10 Mbps. The actual transmission distance may vary due to power consumption of PoE-powered devices or the cable quality and type.

△Numbers after different modes represent the effective ports for that mode.

From United States?

Get products, events and services for your region.

GO Other Option

TL-SG1210PP

10-Port Gigabit Desktop Switch with 6-Port PoE+ and 2-Port PoE++