ดาวนโหลดสำหรับ DS-P8000-X2 V1
ข้อมูลสำคัญ: รุ่นสินค้าและเวอร์ชันฮาร์ดแวร์อาจแตกต่างกันไปตมแต่ละภูมิภาค โปรดตรวจสอบข้อมูลจากเว็บไซต์ TP-Link ของภูมิภาคของคุณเพื่อตรวจสอบความพร้อมของผลิตภัณฑ์.
- คู่มือ
-
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
จะค้นหาเวอร์ชั่นฮาร์ดแวร์บนอุปกรณ์ TP-Link ได้อย่างไร
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
เพิ่มเติม
พับเก็บ
|
DS-MCUA(UN)_V1_1.2.1 Build 20260828
|
ดาวน์โหลด
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
วันที่เผยแพร่: 2026-09-21
|
ภาษา: ภาษาอังกฤษ
|
ขนาดไฟล์: 26.54 MB
|
New features/Enhancement:
1. Add support for prompting users to create a new account in the factory default state when no default account is available.
2. Add support for selectable ONU SN display formats in DHCP Option 82 dynamic parameters.
3. Optimize the default MVR mode configuration to dynamic.
4. Added support for displaying "no spanning tree" information when checking port configuration in the console.
Bug fixed:
1. Fixed security vulnerabilities CVE-2025-15544, CVE-2025-15631, CVE-2025-15628, and CVE-2025-15630.
2. Fixed the bug where the software could occasionally crash due to an exception in the fan control thread after running for an extended period.
3. Fixed the YouTube multicast casting issue.
4. Fixed the bug of memory leaks occurring when multiple modules are accessed through the web interface or interact with the controller.
|
|
DS-LGPA-08(UN)_V1_1.2.1 Build 20260828
|
ดาวน์โหลด
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
วันที่เผยแพร่: 2026-09-21
|
ภาษา: ภาษาอังกฤษ
|
ขนาดไฟล์: 30.07 MB
|
New features/Enhancement:
1. Add support for prompting users to create a new account in the factory default state when no default account is available.
2. Add support for selectable ONU SN display formats in DHCP Option 82 dynamic parameters.
3. Optimize the default MVR mode configuration to dynamic.
4. Added support for displaying "no spanning tree" information when checking port configuration in the console.
Bug fixed:
1. Fixed security vulnerabilities CVE-2025-15544, CVE-2025-15631, CVE-2025-15628, and CVE-2025-15630.
2. Fixed the YouTube multicast casting issue.
|
|
DS-LGPA-16(UN)_V1_1.2.1 Build 20260828
|
ดาวน์โหลด
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
วันที่เผยแพร่: 2026-09-21
|
ภาษา: ภาษาอังกฤษ
|
ขนาดไฟล์: 30.07 MB
|
New features/Enhancement:
1. Add support for prompting users to create a new account in the factory default state when no default account is available.
2. Add support for selectable ONU SN display formats in DHCP Option 82 dynamic parameters.
3. Optimize the default MVR mode configuration to dynamic.
4. Added support for displaying "no spanning tree" information when checking port configuration in the console.
Bug fixed:
1. Fixed security vulnerabilities CVE-2025-15544, CVE-2025-15631, CVE-2025-15628, and CVE-2025-15630.
2. Fixed the YouTube multicast casting issue.
|
|
DS-LGPA-08(UN)_V1_1.1.0 Build 20250618
|
ดาวน์โหลด
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
วันที่เผยแพร่: 2025-10-09
|
ภาษา: ภาษาอังกฤษ
|
ขนาดไฟล์: 30.07 MB
|
New Features/Enhancements:
1. Support Omada management (v6.0+), multi-channel access, and extended Site URL formats
2. Add Service Port Profile and Native-VLAN config for ONU ports
3. Enhance PON/ONU features: relaxed protection time, IPTV/IGMP Proxy, CATV signal, MAC address, last down cause
4. WLAN supports 802.11ax mixed mode and 160MHz channel width
5. Support ONU remote access/reset and extended port descriptions (64 chars)
6. CLI diagnostics for PPPoE, OLT/PON ports, ONU/GEM traffic; SNMP adds board temp and PON traffic
7. DHCP supports Option82 and fallback; subnet mask supports /31
8. Support DS-PMA-C++ module and fiberports info display
9. Upgrade supports credentials starting with '#'
10. Optimize UI and page loading efficiency
|
|
DS-LGPA-16(UN)_V1_1.1.0 Build 20250618
|
ดาวน์โหลด
|
|
วันที่เผยแพร่: 2025-10-09
|
ภาษา: ภาษาอังกฤษ
|
ขนาดไฟล์: 30.07 MB
|
New Enhancement:
1. Support Omada management (v6.0+), multi-channel access, and extended Site URL formats.
2. Add Service Port Profile and Native-VLAN config for ONU ports.
3. Enhance PON/ONU features: relaxed protection time, IPTV/IGMP Proxy, CATV signal, MAC address, last down cause.
4. WLAN supports 802.11ax mixed mode and 160MHz channel width.
5. Support ONU remote access/reset and extended port descriptions (64 chars).
6. CLI diagnostics for PPPoE, OLT/PON ports, ONU/GEM traffic; SNMP adds board temp and PON traffic.
7. DHCP supports Option82 and fallback; subnet mask supports /31.
8. Support DS-PMA-C++ module and fiberports info display.
9. Upgrade supports credentials starting with '#'.
10. Optimize UI and page loading efficiency.
|
|
DS-MCUA(UN)_V1_1.1.0 Build 20250819
|
ดาวน์โหลด
Important Notice
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
|
|
วันที่เผยแพร่: 2025-09-12
|
ภาษา: ภาษาอังกฤษ
|
ขนาดไฟล์: 26.56 MB
|
New Features:
1.Added support for Omada management version 6.0 and above
2.Enabled multi-channel access; WEB and SNMP remain available after Omada adoption
3.Extended Omada Site URL format compatibility
4.Introduced Service Port Profile and ONU Port Native-VLAN configuration
5.Added relaxed protection time mode for PON Port
6.IPTV Service Type and IGMP Proxy now supported in ONU WAN settings
7.WLAN supports 802.11b g n ax on 2.4GHz, 802.11a n ac ax on 5GHz, and 160MHz channel width
8.Added ONU remote access, reset, and CATV signal strength display
9Display of ONU MAC, Client MAC, and last down cause
10.Added PON Description; extended ETH Port Description to 64 characters
11.Adapted DS-PMA-C++ SFP module; fiberports command shows transceiver details
12.DHCP Option82 supported; VLAN 1 can fallback to default IP if DHCP fails
13.Subnet mask now supports 255.255.255.254
14.Added AAA and 802.1x authentication
15.CLI diagnostics for PPPoE, OLT port, PON port, and ONU traffic statistics
16.SNMP enhancements include board temperature and PON traffic query
17.Upgrade fields now support strings starting with hash symbol
18.Improved page loading and UI responsiveness
Bug Fixes:
1.Resolved timeout issue on ONU Info and Upgrade pages caused by unresponsive ONUs marked active on OLT
|
เพิ่มเติม
พับเก็บ
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
