AX5400 Mesh Wi-Fi 6 Extender
- AX5400 Dual-Band Wi-Fi 6: Up to 5.4 Gbps wireless speeds.†
- WiFi Dead-Zone Killer: Four high-gain external antennas extend WiFi signals to every dead zone.
- AP Mode: Simply plug in an Ethernet cable to create a new Wi-Fi AP.
- Seamless Mesh Networking: Supports Omada mesh and roaming for reliable networking.§
- Easy & Quick Installation: Standard AC power supply for flexible deployment.
- Quick Adoption: Convenient operation via Omada web or app once the extender powers on.
- Centralized Cloud Management: Integrates into Omada SDN for cloud access and remote management.
Extender Expand Your
Reach Smoothly
5.4 Gbps
Wi-Fi 6
Dead-Zone Killer
Power Plug
Seamless Roaming△
Easy Setup
Management
QAM
Channel


| HARDWARE FEATURES | |
|---|---|
| Interface | 1 x 10M/100M/1000M Ethernet Port |
| Physical Security Lock | No |
| Button | Reset, LED |
| Power Supply | 100-240 V ~ 50/60 Hz |
| Max. Power Consumption | 16.5 W(Idle Power Consumption: 6.7 W) |
| Dimensions ( W x D x H ) | 6.3 × 3.1 × 1.5 in (160 × 80 × 37.8 mm) |
| Antenna | 4× External Antennas• 2.4 GHz: 2× 5 dBi• 5 GHz: 4× 6 dBi |
| Mounting | Plug-in Wall Mounting |
| Management Features | |
|---|---|
| Omada App | Yes |
| Centralized Management | • Omada Hardware Controller• Omada Software Controller• Omada Cloud-Based Controller |
| Cloud Access | Yes. Require the use of an Omada controller. |
| Email Alerts | Yes |
| LED ON/OFF Control | Yes |
| Management MAC Access Control | Yes |
| SNMP | v1, v2c, v3 |
| System Logging Local/Remote Syslog | Yes |
| SSH | Yes |
| Web-based Management | Yes |
| Management VLAN | Yes |
| Zero-Touch Provisioning | Yes. Requiring the use of Omada Cloud-Based Controller. |
| WIRELESS FEATURES | |
|---|---|
| Coverage | 140 ㎡ (1500 ft²)*** |
| Concurrent Clients | 250+** |
| Wireless Standards | IEEE 802.11ax/ac/n/g/b/a |
| Frequency | 2.4 GHz and 5 GHz |
| Signal Rate | • 5 GHz: Up to 4804 Mbps• 2.4 GHz: Up to 574 Mbps |
| Wireless Functions | • 16 SSIDs (Up to 8 SSIDs on each band)• Enable/Disable Wireless Radio• Automatic Channel Assignment• Transmit Power Control (Adjust Transmit Power on dBm)• QoS(WMM)• Seamless Roaming§• Beamforming• Rate Limit• Load Balance• Airtime Fairness• Band Steering• Reboot Schedule• Wireless Schedule• RADIUS Accounting• MAC Authentication• Wireless Statistics• Static IP/Dynamic IP |
| Wireless Security | • Captive Portal Authentication§• Access Control• Wireless Mac Address Filtering• Wireless Isolation Between Clients• VLAN• Rogue AP Detection• 802.1X Authentication• WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise |
| Transmission Power | • CE7-20 dBm (2.4 GHz, EIRP)9-23 dBm (5 GHz, U-NII-1 & U-NII-2A, EIRP)9-30 dBm (5 GHz, U-NII-2C, EIRP)• FCC4-25 dBm (2.4 GHz)7-28 dBm (5 GHz, U-NII-1 & U-NII-2A & U-NII-2C & U-NII-3) |
| OTHERS | |
|---|---|
| Certification | CE, FCC, VCCI, JRF, SAA, RCM |
| Package Content | • EAP673-Extender • Installation Guide |
| Environment | • Operating Temperature: 0–40 ℃ (32–104 ℉)• Storage Temperature: -40–70 ℃ (-40–158 ℉)• Operating Humidity: 10–90% RH non-condensing• Storage Humidity: 5–90% RH non-condensing•Storage Altitude: up to + 2000 m (6561 feet)•Operating Altitude: up to + 2000 m (6561 feet) |
†Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput, wireless coverage, and connected devices are not guaranteed and will vary as a result of internet service provider factors, network conditions, client limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and client location.
‡Use of Wi-Fi 6 (802.11ax) and features including 160 MHz bandwidth, OFDMA, MU-MIMO, and 1024-QAM requires clients to also support the corresponding features. The 160 MHz bandwidth is only available on the 5 GHz band and may be unavailable in some regions/countries due to regulatory restrictions.
§These features require the use of an Omada controller.
**Actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections.
***Coverage value is calculated based on laboratory testing. Actual coverage is not guaranteed and will vary as a result of client limitations and environmental factors.