What is Local Smart Action?

Tapo Others

Last updated: November 4, 2026

Local Smart Action allows compatible Tapo and Kasa hubs to execute supported Automations locally instead of relying solely on cloud services. This helps Automations respond faster and continue operating during temporary internet or cloud connectivity issues. Learn how Local Smart Action works, its requirements, and how to troubleshoot common issues.

Note: Local Smart Action improves Automation reliability during network fluctuations or temporary internet outages. However, it does not replace cloud-based Automations that require internet access. For the best experience, we recommend maintaining both hub-based and cloud connectivity whenever possible.

Key Takeaways

Local Smart Action enables supported Automations to run directly on a Tapo or Kasa hub.
Local execution improves response speed and reduces dependence on cloud connectivity.
Sub-1G devices must connect to the same hub, while Wi-Fi devices must be on the same local network as the hub.
Automations automatically switch back to cloud execution if they no longer meet Local Smart Action requirements.
The hub must remain powered on, and local network communication must not be blocked by router isolation or segmentation settings.

How Does Local Smart Action Work?

A hub can take over the execution of an Automation when all configured triggers and actions meet the requirements below for Local Smart Action.

All devices participating in a Local Smart Action must meet one of the following requirements: Sub-1G devices connected to the same hub, or Wi-Fi devices connected to the same local network as the hub.

Triggers
Motion Sensor	Motion Detected
Motion Sensor	No Motion Detected for a Set Time
Contact Sensor	Open
	Close
	Triggered
	Kept Open for 1 Min
	Kept Open for a Set Time
Water Leak Sensor	Water Leak Detected
Water Leak Sensor	Water Leak Solved
Temperature and Humidity Sensor	Temperature above
	Temperature below
	Humidity above
	Humidity below
Button	Single Tap
	Double Tap
	Rotate Clockwise
	Rotate Counterclockwise
Hub	Ring

Actions
Lighting	Turn On
	Turn Off
	Turn On/Off
	Turn on and customize lighting
	Remain on for a set time
	Brightness +
	Brightness -
	Color Temperature +
	Color Temperature -
	Random Color
	Fade On/Off
Plug, Switch	Turn On
	Turn Off
	Turn On/Off
	Remain on for a set time

Q&A

Q1: Why Isn't My Local Smart Action Working?

If a Local Smart Action is not running as expected, check the following:

1. Update Device Firmware. Ensure both the hub and participating devices are running the latest firmware version.

2. Review Automation Settings. If you modify an Automation and it no longer meets the requirements for Local Smart Action, execution will automatically revert to the cloud.

3. Check Device Connections. All devices participating in a Local Smart Action must meet one of the following requirements: Sub-1G devices connected to the same hub, or Wi-Fi devices connected to the same local network as the hub.

4. Confirm Hub Control Status. Automations managed by the hub are marked with a Local Smart Action icon ( Tapo app icon. for Tapo/ Kasa app icon. for Kasa) for easy identification.

5. Check Hub Power Status. The hub must remain powered on for Local Smart Actions to run. If the hub is powered off and later restored, Automations that use Time Triggers or Effective Time conditions may not resume immediately until the hub reconnects to the internet and synchronizes its system time.

6. Check Router Configuration. Local Smart Action requires devices to communicate on the same local network. The feature may not work if your router enables network isolation/segmentation, or blocks communication between local devices.

Q2: Why Can't I Edit or Delete a Local Smart Action?

If an Automation is currently managed by the hub, you cannot edit or delete it while the hub is disconnected from both the local network and the cloud.

Once the hub reconnects and returns online, the Automation can be edited or deleted normally.