Archer BE3600 Pro Setup Guide

Model: Archer BE3600 Pro

Welcome! Let’s get your router up and running together.
This guide makes setup simple for everyone, covering helpful accessibility resources, what’s in the box, how it looks, and where to begin.

Our Tether app and web management page also offer accessibility features, such as increasing page contrast, switching to landscape mode and increasing font size. You can enable them during setup to make it much easier to set up your device and adjust settings! For more accessibility guidance, refer to Accessibility Support.

Note: For some models, Accessibility features will be supported by subsequent firmware upgrades.

Now, ready to explore your router and get connected?

Step 1. Learn About Your Router

This section introduces the router's package contents and appearance, including its ports, buttons, and product label.

1. Unpack Your Router

Your package includes: a router, a power adapter, an Ethernet cable, and installation guides.

Power Adapter: A block-shaped charger with a cord. Plug it into the router’s power port to turn it on.

Ethernet Cable: A thick cable with plastic connectors at both ends. Each connector has a small clip to hold it in place. To use the cable, insert one end to the WAN port on your router until you hear or feel a click and the other end to an Ethernet outlet or a modem. To unplug it, you can press the click and pull it out.

2. Appearance

The router is shaped like a tall, smooth-edged rectangular box with softly rounded corners and a slightly curved front surface. On one edge, it features LED indicators that show the status of power, signal strength, and connection. On the other edge, it features buttons and ports. It has no external antenna.

Start by mounting the device on a level surface. Locate the removable base, which feels like a flat, oval-shaped platform. Vertically position the extender on the removable base and slide it until it is securely fastened in place.

On the edge of the router which is a concaved space, there are buttons and ports. From top to bottom, they are:

Wi-Fi: LED Button: Press and hold for 2 seconds to enable or disable wireless broadcasting. Press for 1 second to turn the router’s LED on or off.
Reset Button: A tiny recessed hole (needs a pin to press). Hold for over 10 seconds to reset the router to its factory settings. Then the device takes approximately 2 minutes to boot up.
WPS button: A small, round button. Press for 1 second, and immediately press the WPS button on your client device to start the WPS process.
LAN4 Port: A rectangular port. Connects to a PC or other wired device.
LAN3 Port: A rectangular port. Connects to a PC or other wired device.
LAN2 Port: A rectangular port. Connects to a PC or other wired device.
2.5Gbps LAN1 Port: A rectangular port. Connects to a PC or other wired device.
2.5Gbps Internet Port: A rectangular port. Connects to your modem or Ethernet outlet.
Power Port: A round port. Plug in the power adapter to supply power.

On the surface of the router, there is a recessed label. This label includes: the router’s default network name (SSID), the MAC address, and a QR code for scanning to connect to the default Wi-Fi.

Step 2. Set Up Your Router

1. Position your router. Make sure that the router is within reach of an AC power outlet and near Ethernet cables for wired devices.

2. Scan the QR code below to download the Tether app for iOS or Android, or scan the QR code on the Quick Setup Guide for the Tether app. The app will walk you through setup.

Scan the QR code for Tether app

Note:

Please remain online (Wi-Fi or mobile data) throughout the app download and login steps.

The device takes approximately 2 minutes to boot up.

Tip:

You can also cable and set up your router with a web browser via http://tplinkwifi.net or http://192.168.0.1. For detailed information, please refer to the router’s quick installation guide or user guide.

Support

For technical support, replacement services, user guides, and other information about your product model, please visit https://www.tp-link.com/support/