How to Import a CAD File for Heat Map Simulation via the Omada SDN Controller

User Application Requirement
Updated 05-13-2024 22:23:23 PM FAQ view icon9035
This Article Applies to: 

This Article Applies to the Omada SDN Controller (V5.1 and later versions)

Introduction

A Wi-Fi heat map is a visual representation of wireless signal coverage and strength.

It aids in pinpointing weak signal areas and enhancing wireless network coverage with simulations during various deployment phases.

The Omada SDN Controller has a built-in Heat Map feature, facilitating better wireless deployment and signal coverage monitoring. When generating a heat map, you can import a CAD file to draw a wall automatically.

Procedure

Step 1 Prepare Your CAD File

Contact your layout designer to obtain a CAD file in .dxf format. If you use CAD software to draw the layout, please refer to the relevant CAD software to help export a CAD file in .dxf format.

Step 2 Import Your CAD File to Generate a Map

  1. Launch your Omada Controller and enter the site view.
  2. Go to Map > Heat Map. A default map is displayed.

  1. Click the  icon behind the Heat Map drop-down list to add a map.

    1. Enter a description for the map.
    2. Select the general layout of the map. This will make the simulation more accurate.
    3. Upload your CAD file and click Add. The controller will identify the layout and elements in the CAD file.

Tip: You can drag and drop to move the map and use the  icons in the upper-right corner to fit/zoom in/zoom out the map. You can also use your mouse wheel to zoom in/out of the map.

    1. Click  to hide undesired layers of the CAD image. Their icons will change to  and these hidden layers will not be imported to the map.
    2. Click the check box of each desired layer and choose the wall type according to your actual layout. Actual wall settings will make the simulation more accurate. If you are unsure of the wall type, contact your layout designer.

    1. After setting the wall type for layers, the map's lines will change accordingly. Click Finish to generate the map.
      • Layers with wall type specified will be imported to the map and identified as walls.
      • Layers with  but not specified as a wall type will be imported to the map but not identified as walls.
      • Layers with will not be imported to the map.

    1. Set the map scale. Draw a line on the map by clicking and dragging, and then define the distance of the line according to your actual layout.

Now, the map is generated from your CAD file.

Tips:

      1. After setting the map scale, you can click the icon to draw a line on the map to measure the actual distance according to the map scale.
      2. If you want to change the map scale, click the  icon in the upper-right corner.

Step 3 Add Wireless Devices to the Map

  1. Click the  icon in the upper-left corner. The list of adopted and virtual wireless devices will appear.

  1. Drag wireless devices to the desired place on the map and click each device to configure map settings.
    1. If you add adopted devices, the controller will generate the heat map based on the actual state of the corresponding devices.
    2. If you add virtual devices, the controller will generate the heat map based on your settings.

Tips:

  1. You can use the search bar to quickly find the models or device types you want.
  2. For a virtual device, you can click Copy to Map to copy it to the map quickly.

  1. Adjust the opacity and icon size if needed. Then click Done.

Step 4 Simulate the Heat Map

Click Simulate to generate the heat map. You can switch each wireless band for heat map simulations. Depending on your computer performance and the heat map scale, this may take some time.

Adjust the receiver sensitivity according to the wireless coverage required by the project; then, the places that are not filled with “wireless signal” are the places where the wireless coverage does not meet the requirements. You can add or remove wireless devices or adjust device parameters according to the project requirements.

Click the  button to draw the area you want to evaluate, and click Start Calculation to view the signal coverage.

Step 5 Export the Heat Map Report

Click the  icon in the upper-right corner to generate a report, which includes information on the devices, layout, and heat map for the wireless bands you have simulated.

 

Is this faq useful?

Your feedback helps improve this site.

Recommend Products

Community

TP-Link Community

Still need help? Search for answers, ask questions, and get help from TP-Link experts and other users around the world.

Visit the Community >

icon

Accessibility Adjustments

icon RESET

Choose the right accessibility profile for you

OFF

Seizure Safe

Eliminates flashes and reduces color

OFF

Cognitive Disability

Assists with reading and focusing

OFF

Vision Impaired

Enhances the website's visuals

OFF

ADHD Friendly

More focus and fewer distractions

Content Adjustments

Adjust Scale

icon
100%
icon

Highlight Title

icon

Highlight Link

icon

Text Magnifier

icon

Readable Font

icon

Align Center

icon

Align Left

icon

Align Right

icon

Color Adjustment

Low Saturate

icon

High Saturate

icon

Dark Contrast

icon

Light Contrast

icon

Set Text Colors

Monochrome

icon

Set Title Colors

High Contrast

icon

Set BackgroundColor

Orientation Adjustments

Muted

icon

Hide Images

icon

Stop Animation

icon

Reading Mask

icon

Highlight Hover

icon

Big Black Cursor

mutedicon

Big White Cursor

icon

Hide Video/Audio

icon

Stop Video

icon

Stop Audio

icon

Hide Animation

icon

Reading Guide

icon

Useful Links

Chat Now