LS108GP
New8-Port Gigabit Desktop Switch with 8-Port PoE+
- Full Gigabit Ports: Eight gigabit auto-negotiation ports provide up to 16 Gbps switching capacity.
- 62 W PoE Budget: Eight gigabit 802.3af/at-compliant PoE+ ports easily connect and power fixed devices like IP cameras, access points, and IP phones via a single cable. Up to 30 W PoE output is supported by each PoE port.*
- Up to 250 m PoE Transmission: With Extend Mode, PoE transmission distance reaches up to 250m, perfect for surveillance camera deployment in large areas.**
- PoE Auto Recovery: Automatically reboots your dropped or unresponsive PoE-powered devices.
- Plug and Play: Simply plug and play for instant connectivity with no configuration required.
- Silent Operation: Fanless design reduces power consumption and ensures silent operation, ideal for noise-sensitive homes or businesses.
- Reliable Hardware Design: Durable metal casing and desktop/wall-mounting design are well-suited for different environments.
-
62 W PoE
Budget* -
Long-Range PoE+
(250 m**) -
PoE Auto
Recovery -
Intelligent Power
Management -
Desktop or
Wall-Mounting -
Plug
and Play -
Silent
Operation -
Durable Metal
Casing
Power over Ethernet, Flexible Network Deployment
Compliant with the IEEE 802.3af/at PoE standards, the switch supports a total PoE power budget of 62 W with 30 W max per PoE+ port. When total power consumption exceeds 62 W, the intelligent power management will cut the lower priority ports power to protect devices from damage.
-
Access
Point -
IP
Phone -
IP
Camera -
IPTV
-
Network Video
Recorder -
Computer
Instantaneous Multi-mode Toggles, Ideal for IP Surveillance△
Up to 250m Transmissions
With extend mode, the PoE transmission distance reaches up to 250 m** —perfect for IP Camera deployment in large areas.
PoE Auto Recovery
Recovery mode helps automatically detect and reboot PD devices, such as cameras and APs, when they fall offline or go unresponsive—all without needing manual monitoring and restarts.
-
Up to 250m Transmissions
With extend mode, the PoE transmission distance reaches up to 250m** —perfect for IP Camera deployment in large areas.
-
PoE Auto Recovery
Recovery mode helps automatically detect and reboot PD devices, such as cameras and APs, when they fall offline or go unresponsive—all without needing manual monitoring and restarts.
Plug and Play
-
1. Connect to Power
-
2. Connect the Devices
IP Phone
IP Camera
Access Point
Internet
Router
-
3. Enjoy
*PoE budget calculations are based on laboratory testing. The actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
**The speed of the ports which are under extend mode will be downgraded to 10Mbps. Actual transmission distance may vary from the quality of the cables.
△Numbers after different modes represent the effective ports for that mode.