SG3452XMPP
NewOmada 48-Port Gigabit and 4-Port 10GE SFP+ L2+ Managed Switch with 40-Port PoE+ & 8-Port PoE++
- 4× 10 Gbps SFP+ slots
- 8× Gigabit 802.af/at/bt PoE++ ports (Max 90 W PoE budget for each port)
- 40× Gigabit 802.3af/at PoE+ ports (Max 30 W budget for each port)
- 750 W total PoE budget*
- Centralized cloud management via the web or the Omada app†
- Standalone management via web, CLI, SNMP, and RMON
- Static Routing helps route internal traffic for higher efficiency
- VLAN, ACL, QoS, IGMP Snooping, OAM, and DDM
- ERPS supports rapid protection and recovery in a ring topology
- Durable metal casing and rack-mountable design
Learn more about Omada Cloud SDN>
-
48× Gigabit RJ45 Ports
(8× PoE++, 40× PoE+) -
4× 10 Gbps
SFP+ Slots -
750 W Total PoE
Budget (Max 90 W for
Each PoE++ Port)* -
Centralized
Management† -
Omada
App† -
Zero-Touch
Provisioning† -
Ethernet Ring
Protection Switching -
Static
Routing
Empowering the High-Power Devices with Gigabit PoE++ Ports
-
8× Gigabit
PoE++
RJ45 Ports
-
40× Gigabit
PoE++
RJ45 Ports
-
Budget Up to
90W
per PoE++ Port
-
Total
750W
PoE Power*
-
Access
Points -
PTZ HD IP Cameras
with Heaters -
Smart Building
Lighting -
Audio
System -
Thin
Clients
Easily Build a Whole 10G Multi-gigabit Network
-
Switch with
10G Uplink -
PoE Switch
with 10G Uplink -
Wi-Fi 7/6 APs
with 10G/2.5G Ports
Software Defined Networking (SDN) with Cloud Access
Remotely manage your access points, switches, and gateways across multiple sites all from a single interface.
Controller
Controller
Controller
(Subscription Required)
Multiple Application Scenarios
-
Surveillance
Works with IP Cameras
-
Conference Call
Works with IP Phones
-
Wi-Fi Coverage
Works with Access Points
-
Wired Connections
Works with Non-PoE Devices such as PCs and Printers
†These functions require the use of the Omada SDN Controller. Zero-Touch Provisioning requires the use of the Omada Cloud-Based Controller. Go to the Omada Cloud-Based Controller Product List to find all the models supported by the Omada Cloud-Based Controller.
*PoE budget calculations are based on laboratory testing. The actual PoE power budget is not guaranteed and will vary due to client limitations and environmental factors. The maximum power output of every single PoE++ port is 90 W. SG3452XMPP is incompatible with Passive PoE and other non-standard PoE devices. The standards refer to IEEE 802.3af/at/bt.
**ISP features can only be configured in standalone mode.
Attention: It is recommended to use only one SM5310-T (TL-SM5310-T) module for SG3452XMPP.