Common Questions on TP-Link Wi-Fi 7 Wireless Router and Deco Products

Archer BE7200 , Archer BE700 Pro , Deco BE95 , Archer BE230 , Archer BE450 , Deco BE5000 , Archer BE550 , Archer GE650 , Archer GE550 , Archer AXE75 , Deco BE65 Pro , Archer BE11000 Pro , Archer AXE5400V , Deco BE11000 , Deco BE25 , Archer BE550 Pro , Archer GXE75 , Archer BE6500 , Deco BE85 , Deco BE63 , Deco BE65 , Archer BE220 , Deco WB10800 , Archer BE400 , Archer BE700 , Archer BE800 , Archer BE900 , Deco X50-5G , Archer GE800 , Archer BE3600 , Archer BE805
Recent updates may have expanded access to feature(s) discussed in this FAQ. Visit your product's support page, select the correct hardware version for your device, and check either the Datasheet or the firmware section for the latest improvements added to your product. Please note that product availability varies by region, and certain models may not be available in your region.
Q1. What is Wi-Fi 7?
Wi-Fi 7 is the upcoming Wi-Fi standard, also known as IEEE 802.11be Extremely High Throughput (EHT). It works across all three bands (2.4 GHz, 5 GHz, and 6 GHz) to fully utilize spectrum resources.
For more information about Wi-Fi 7, please refer to: What is WiFi 7?
Q2. Which wireless client devices support 6 GHz Wi-Fi?
6GHz Wi-Fi is supported on Wi-Fi 6E and Wi-Fi 7 products. Since Wi-Fi 6E and Wi-Fi 7 are hardware-dependent, client devices manufactured before 2020 is not likely to support 6GHz Wi-Fi. Here are some common wireless client devices that support 6GHz radio:
Common 6GHz Wireless client devices
Note: The above list might not include all devices vendors or models that support 6GHz and there will be more in the future. To make sure that the device is 6GHz capable, it is recommended to refer to the official website of the end devices or contact the device vendor.
The following takes Intel’s AX211 network adapter as an example for reference, you may find the bands 6GHz in the specifications:
Q3. Which wireless client devices support Wi-Fi 7?
Since Wi-Fi 7 is hardware-dependent, client devices manufactured before 2022 are not likely to support Wi-Fi 7. Currently, only several new smartphones support Wi-Fi 7 and there will be more in the future. To make sure if your device supports Wi-Fi 7 or not, it is recommended to contact the device vendor or check the device specification on the vender official website.
Q4. What should I do if I cannot see or connect the 6GHz Wi-Fi of my Router or Deco?
Please refer to the instruction here for troubleshooting: Can’t find or connect to 6GHz Wi-Fi?
Q5. Will my old phones and laptops work with a Wi-Fi 7 router or Deco?
Yes, Wi-Fi 7 products have 2.4GHz and 5GHz wireless radio as well. Your old phones and laptops can still connect to the traditional 2.4GHz or 5GHz band. But if you want to connect your client device to 6GHz wireless signal, please make sure your client devices are 6GHz capable.
Q6. Can the two ports of the Combo Port (RJ45 and SFP+) be used at the same time?
No, the two combo ports cannot work at the same time. When one of the ports is being used for data transfer, the other port will become inactive and will not be able to transmit or receive data.
Q7. Can I still use my older Deco units after getting a Wi-Fi 7 Deco?
Yes, all Deco products are designed to work together. You may add a Wi-Fi 7 deco to an existing network first and then setup the Wi-Fi 7 deco as the main node for your network. This will allow your most powerful node to manage your network while providing high-speed backhauls to satellites and devices.
How to Setup the Satellite Deco to be the Main Deco
Please note that the MLO network is only available on the Wi-Fi 7 Deco because other Wi-Fi 6/6E models don’t have MLO capability. Some other features such as MLO, or Signal/ Band / Node Preference require compatible firmware for models across your entire network.
Q8. I have a broadband subscription of over 1Gbps, why is the speed of my PC still lower than 1Gbps even when I am using the 10G port on the Router?
There are a few things that you may check to troubleshoot and identify the cause of your slowed connection:
1) First, make sure the Ethernet Adapter of your PC supports over 1Gbps.
2) Confirm that you are receiving 1Gbps+ from your ISP by connecting your PC directly to the modem,
3) Check the physical link speed between the Router and your PC:
How to check the associated/link speed on a wired client
4) We also recommend using a CAT6 or above Ethernet cable to achieve speeds over a gigabit.
5) Check your Quality of Service (QoS) for any settings or high-priority devices.
Q9. Will the MLO network improve my wireless performance?
It depends on the MLO type of the client, if it’s 2G+6G STR MLMR, then the performance might not raise a lot; If the client supports 5G+6G STR MLMR, it will raise the performance than pure 6G connection a lot.
Q10. How to use and connect the SFP+ port
We recommend that you use an “optical module (SFP+ LC Transceiver) + optical fiber” to connect the SFP+ port to ensure the compatibility of the SFP+ port. Currently, we don’t recommend using DAC copper cables to connect to the SFP+ port.
Czy ten poradnik FAQ był pomocny?
Twoja opinia pozwoli nam udoskonalić tę stronę.
Jakie są Twoje uwagi dotyczące tego artykułu?
- Niezadowolenie z produktu
- Zbyt skomplikowany
- Mylący tytuł
- Nie dotyczy mnie
- Zbyt ogólnikowy
- Inne
Dziękujemy
Dziękujemy za przesłanie opinii.
Kliknij tutaj, aby skontaktować się ze Wsparciem technicznym TP-Link.
z United States?
Uzyskaj produkty, wydarzenia i usługi przeznaczone dla Twojego regionu.
Ta witryna wykorzystuje tzw. pliki cookies, aby usprawnić jej przeglądanie, w celu analizy ruchu oraz do jak najlepszej optymalizacji wyświetlanych treści. W każdej chwili można wyłączyć obsługę plików cookies. Więcej informacji na ten temat dostępnych jest w Polityce prywatności
Ta witryna wykorzystuje tzw. pliki cookies, aby usprawnić jej przeglądanie, w celu analizy ruchu oraz do jak najlepszej optymalizacji wyświetlanych treści. W każdej chwili można wyłączyć obsługę plików cookies. Więcej informacji na ten temat dostępnych jest w Polityce prywatności
Podstawowe Cookies
Te pliki cookies niezbędne są do poprawnego działania witryny i nie moga zostać wyłączone.
TP-Link
accepted_local_switcher, tp_privacy_base, tp_privacy_marketing, tp_smb-select-product_scence, tp_smb-select-product_scenceSimple, tp_smb-select-product_userChoice, tp_smb-select-product_userChoiceSimple, tp_smb-select-product_userInfo, tp_smb-select-product_userInfoSimple, tp_top-banner, tp_popup-bottom, tp_popup-center, tp_popup-right-middle, tp_popup-right-bottom, tp_productCategoryType
Czat na żywo
__livechat, __lc2_cid, __lc2_cst, __lc_cid, __lc_cst, CASID
Youtube
id, VISITOR_INFO1_LIVE, LOGIN_INFO, SIDCC, SAPISID, APISID, SSID, SID, YSC, __Secure-1PSID, __Secure-1PAPISID, __Secure-1PSIDCC, __Secure-3PSID, __Secure-3PAPISID, __Secure-3PSIDCC, 1P_JAR, AEC, NID, OTZ
Cookies dotyczące analizy i marketingu
Analiza - Te pliki Cookies są wykorzystywane w celu analizy ruchu na naszej stronie, co umożliwia poprawę i dostosowanie wyświetlanych treści.
Marketing - Te pliki Cookies mogą być wykorzystywane przez naszych partnerów reklamowych podczas tworzenia profilu Twoich zainteresowań, co pozwala na wyświetlanie odpowiednich reklam na innych stronach.
Google Analytics & Google Tag Manager
_gid, _ga_<container-id>, _ga, _gat_gtag_<container-id>
Google Ads & DoubleClick
test_cookie, _gcl_au
Meta Pixel
_fbp
Crazy Egg
cebsp_, _ce.s, _ce.clock_data, _ce.clock_event, cebs
lidc, AnalyticsSyncHistory, UserMatchHistory, bcookie, li_sugr, ln_or