The differences and similarities between Load Balancing and Link Backup

Q&A of functional explanation or specification parameters
Updated 08-19-2024 03:52:11 AM FAQ view icon5146
This Article Applies to: 

Contents

Objective

Requirements

Introduction

Differences between Load Balancing and Link Backup

Similarities between Load Balancing and Link Backup

Conclusion

Objective

This article will introduce the similarities and differences between WAN Load Balancing and WAN Link Backup features of the Omada gateways, as well as their relationship with online detection.

Requirements

  • Omada Gateways
  • Omada Software Controller / Hardware Controller / Cloud-Based Controller

Introduction

The Omada gateway’s Load Balancing feature supports multi-WAN internet access, allowing users to distribute network traffic across multiple WAN ports based on traffic and resource usage. This helps reduce network congestion and resource wastage.The WAN Link Backup feature provides link backup based on multi-WAN internet access, and supports link switching between primary WAN and backup WAN.

The Load Balancing feature distributes connections proportionally. Based on the currently online WAN ports and the bandwidth and weight settings configured for each WAN link, the device will decide which WAN entry the next data packet should pass through.

If you want to learn more about how to configure Load Balancing, please refer to the configuration guide How to configure Load Balancing on Omada Gateway via Omada Controller.

The Link Backup feature provides a failover mechanism for your network, which ensures the network’s reliability and stability of the network. It allows for seamless switching to a backup link when the primary network link fails, ensuring uninterrupted network communication.

If you want to learn more about how to configure Link Backup, please refer to the configuration guide How to Configure Link Backup on Omada Gateway via Omada Controller

Differences between Load Balancing and Link Backup

1. Functionality

Load Balancing is mainly designed to distribute traffic across multiple links to improve application responsiveness and overall network throughput. It can significantly improve the system's ability to handle a large number of concurrent requests, improving user experience.

Link Backup is mainly designed to provide a backup link in case of primary network link failure, which will ensure continuous network connection and data transmission. This feature mainly ensures high availability of network links, so that key services will not be interrupted when the link fails.

2. Traffic Distribution

Load Balancing can dynamically distribute traffic to each WAN connection according to the preset strategy (proportion), while Link Backup switches traffic to the backup link only when the primary link fails.

3. Configuration

Load Balancing requires configuring weight for each WAN port, and traffic distribution follows these ratios (see below). For detailed instructions, please refer to the configuration guide How to Configure Load Balancing on Omada Gateway.

In Controller mode, you can go to Settings > Wired Networks > Internet > Load Balancing to configure Load Balancing.

To configure Link Backup, you need to configure the primary and backup WAN ports and define the fault detection and switching strategies (see below). For detailed instructions, please refer to the configuration guide How to Configure Link Backup on Omada Gateway.

In Controller mode, you can enable and configure Link Backup on Settings > Wired Networks > Internet > Load Balancing > Link Backup.

In summary, in a multi-WAN scenario, the Load Balancing feature, focusing on improving network performance and optimizing resource allocation, distributes network data to all online WAN ports. On the other hand, the Link Backup feature, focusing on improving network reliability and failover ability, provides a backup WAN link for the system.

For example, if a client, with internet links from two or more ISPs, hopes to fully utilize the bandwidth of all links based on the bandwidth allocation, Load Balancing can meet this demand.

If the client mainly uses the link with a higher bandwidth, and hopes to enable the backup link in case of a failure on the primary link to ensure uninterrupted network connectivity, Link Backup is suitable for such a scenario.

Similarities between Load Balancing and Link Backup

The Load Balancing and Link Backup features on Omada gateways are both designed for multi-WAN scenarios; they both improve network stability and reliability by optimizing the distribution of network traffic;and they both determine which link the network data should be sent through based on the status of the WAN ports.

The Load Balancing feature only distributes traffic to all online WAN ports. However, when the Link Backup feature is enabled, it monitors the status of the primary and backup links: If the primary link changes from online to offline, Link Backup will activate the backup link, and network data will then be sent through the backup link if it is detected as online.

In Controller mode, go to Device > Details > WAN (the corresponding WAN port) > Online Detection to check the status detection.

Conclusion

The above are the similarities and differences between Load Balancing and Link Backup. You can configure the two features according to your actual needs.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

Related FAQs

Is this faq useful?

Your feedback helps improve this site.

Recommended Products

Community

TP-Link Community

Still need help? Search for answers, ask questions, and get help from TP-Link experts and other users around the world.

Visit the Community >

From United States?

Get products, events and services for your region.