Does my device support the Omada app?

Follow the steps below to make sure the Omada app is supported on your Omada device.

1. Find out firmware version of your Omada device.

Follow the steps below to find the firmware version of your device ( Click here to know how to find the hardware versions) :

  • STEP1
  • STEP2
  • STEP3
  • STEP4
  • STEP1

    Power on the EAP and connect to the SSID of the EAP wirelessly.

    Tips: If your EAP is a brand new EAP, use the default SSID (format: Omada_2.4GHz/5GHz_XXXXXX) printed on the product label.

  • STEP2

    Launch a web browser and enter http://omadaeap.net in the address bar.

  • STEP3

    Enter the username and password of your EAP to log in.

    Note: If your EAP is a brand new EAP, use the default username and password that are both admin.

  • STEP4

    Go to the Monitoring > AP > Device Information page. You can view the Firmware Version as the following figure shows. The Build number indicates the released date, for example, 20180411 means the released date is April 11th, 2018.

2. Check compatibility

View the compatible devices list below to check if your device is compatible with Omada app. Please click the device image and check if you have the latest firmware. If not, download the latest firmware and follow the instructions in Step 3 to upgrade it.

Note 1: Both listed and higher hardware versions of these models are compatible with Omada APP.

Note 2: All the access points listed below are compatible with Omada App in both controller and standalone modes. While all the switches and routers listed below are compatible with Omada App only in controller mode.

*EAP245 V1, EAP225 V2/ V1, EAP115 V2/ V1, EAP110 V2/ V1, and EAP110-Outdoor V1 are also compatible with Omada App in standalone mode.

Access Points (Compatible in Controller and Standalone Modes)

  • EAP653

    EAP653

    AX3000 Ceiling Mount WiFi 6 Access Point
    Bestseller von WiFi 6 AP

  • EAP650

    EAP650

    AX3000 WiFi 6 Accesspoint zur Deckenmontage

  • EAP230-Wall

    EAP230-Wall

    Omada AC1200 WLAN MU-MIMO Gigabit Accesspoint zur Wandmontage

  • EAP772

    EAP772

    BE9300 Ceiling Mount Tri-Band Wi-Fi 7 Access Point

  • EAP783

    EAP783

    BE19000 Ceiling Mount Tri-Band Wi-Fi 7 Access Point

  • EAP773

    EAP773

    BE9300 Ceiling Mount Tri-Band Wi-Fi 7 Access Point

Alle anzeigen 37 Access Points (Compatible in Controller and Standalone Modes)

Switches (Compatible in Controller Mode)

  • SX6632YF

    SX6632YF

    Omada 26-Port 10G Stackable L3 Managed Aggregation Switch with 6 25G Slots

  • SG6654XHP

    SG6654XHP

    Omada 48-Port Gigabit Stackable L3 Managed PoE+ Switch with 6 10G Slots

  • SG6654X

    SG6654X

    Omada 48-Port Gigabit Stackable L3 Managed Switch with 6 10G Slots

  • SG6428XHP

    SG6428XHP

    Omada 24-Port Gigabit Stackable L3 Managed PoE+ Switch with 4 10G Slots

  • SG6428X

    SG6428X

    Omada 24-Port Gigabit Stackable L3 Managed Switch with 4 10G Slots

  • SX3206HPP V1.20

    SX3206HPP V1.20

    Omada 6-Port 10GE L2+ Managed Switch with 4-Port PoE++

Alle anzeigen 39 Switches (Compatible in Controller Mode)

Routers (Compatible in Controller Mode)

  • ER8411

    ER8411

    Omada VPN Router with 10G Ports

  • ER7412-M2

    ER7412-M2

    Omada Multi-Gigabit VPN Router

  • ER7406

    ER7406

    Omada Gigabit Rackmount/Desktop VPN Gateway

  • TL-ER7206

    TL-ER7206

    SafeStream Gigabit Multi-WAN VPN Router

  • ER7206

    ER7206

    Omada Gigabit VPN Router

  • ER707-M2

    ER707-M2

    Omada Multi-Gigabit VPN Router

Alle anzeigen 9 Routers (Compatible in Controller Mode)

Routers (Compatible in Controller and Standalone Modes)

  • ER706W

    ER706W

    Omada AX3000 Gigabit VPN Router

  • ER706W-4G

    ER706W-4G

    Omada 4G+ Cat6 AX3000 Gigabit VPN Router

3. Upgrade the firmware of your Omada device.

Follow the steps below to upgrade the firmware of your device:

  • STEP1
  • STEP2
  • STEP3
  • STEP4
  • STEP1

    Power on the EAP and connect to the SSID of the EAP wirelessly.

    Tips: If your EAP is a brand new EAP, use the default SSID (format: Omada_2.4GHz/5GHz_XXXXXX) printed on the product label.

  • STEP2

    Launch a web browser and enter http://omadaeap.net in the address bar.

  • STEP3

    Enter the username and password of your EAP to log in.

    Note: If your EAP is a brand new EAP, use the default username and password that are both admin.

  • STEP4

    Go to the System > Firmware Update page. Click the button, locate and choose the correct firmware file from your host. Then click the button to update the firmware of the EAP. After upgraded, the EAP will be rebooted automatically.

Von United States?

Erhalten Sie Produkte, Events und Leistungen speziell für Ihre Region

Remove